302 Royalty-Free Audio Tracks for "Frequency Noises"

A minimal drone. Might need some eq-ing. The frequency analysis reveals an extreme graph. A both extreme and minimal sound. Will anybody download it?.

Removed the hum from cognito-perceptu's pill-bottle-4 sample. Original sample had truck in background in addition to some low frequency hum. Used the remove hum feature on izotope rx2 and, presto-chango, no distracting background noise. Now there is still a high frequency hum which i did not touch. I think this could be mitigated with a low pass filter in eq if you choose.

500 hz tone or 500 hz sine wav sound effect. Ear piercing.

Noises from an old gdr tube radio (1966, oberon) when tuning through mw, lw and ukw bands. I tried to separate the different noises and let them be heard for a few seconds so you can edit the noises you need. First there's lw, then mw then a few noises from buttons on the radio then ukw at the end with fragments of some german radio stations in 2021.

Made with some noise from a recording and sampled 5 tones higher, has some nice low frequencies. Completely free to use, once downloaded it's yours.

Wet peas dropped in a glass bowl. Recorded through audacity with an audio technica a2020 microphone. I reduced some backround noise and sent it through a high pass to reduce low frequencies.

Synthesized soundit's a regular sine with a fast, chaotic pitch modulation9 notes, first note on each octavesurge xt synthesizer.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

There are many ways to "listen" to a computer. The high frequencies are miles from what a human can hear, so you must divide and mix until you hear the computer "speaking". This one: simply placed the am mf coil close to a data cable to a pci slot. The sharp noise is not noise, but clock signals which are divided x times the rattling is caused by every move with the mouse.

The static at various points on the am radio bandwidth from 1040 khz to 1220 khz. Recorded from a digital tuner so the switch from location to location is a cold chop.

This is a low hum sound generated by my naturalnoisegen program. Naturalnoisegen uses several timed generators to produce complex natural noises. In this case, 500 very low frequency generators with a long period were used.

Electromagnetic signal emanations from the power supply of a landline phone. Recorded with a small pickup coil using a tascam dr-05x.

Pattern 5 seaweed. Long. Some low frequencies. The pattern is here: https://www. Instagram. Com/p/bmluh8vajro/?taken-by=gis_sweden.

This is the sound that myself and others agree is what you hear when a loud noise makes your ears ring. Why this particular frequency? i don't know. It's just a simple generated tone--you can loop it to make it longer.

Scanning through frequencies on an old sterling multi-band radio receiver. Ha-5900. Medium wave, long wave, fm, marine-air, sw1, sw2.

I recorded the last part of my travel to work, the first day after my vacation. Inside the train my recording equipment (soundman digital recorder dr2) generates a lot of digital noise – more than usual. Interesting. Therefore i upload from when the commuter train stops at gothenburg central station and the doors open and i walk away from the station. The digital noise is there all the time but just less audible. In the beginning of the sound file you hear the noise clearly. Don’t buy this little recorder… (it has a sigmatel recording chip. ). In the frequency analysis, and spectral view, i notice peaks at about 800 - 950hz, 7850 - 8350hz and 16100-16450hz. I guess this is part of the digital noise. Tried to eq this away with spectral edit. This did not improve the sound. The noise has a wider spectrum. Tried to download the “latest” firmware at www. Soundman. De. Had to open command prompt and use unzip to extract the files. What?! but the firmware downloader does not detect the “device”. I doubt there is a new firmware anyway. The year for this recording, according to the recorder, is 2002…. The recording starts about 07:50 monday, august 07, 2017. I took 2 seconds from the beginning of this file and used paulstretch. Resulting in a 20second digital noise drone, “dr2 digital noise”,https://freesound. Org/people/gis_sweden/sounds/399075/had a thought that i could use a file like this to cancel out these frequencies from the other file with an inverted digital noise file… but i cant invert frequencies – off course :-d.

. Wav created from a "save us" image in a frame. . Added and lowered some frequences with some eq. Simple in and out automation low pass filter. Fade with volume. And a bunch of compression. When you use this noise. Just remember, this was created from an image that said, save us.

Noise processed with various audacity effects until it looked like stereotypical lips in the soundwave view. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

Noise processed with various audacity effects until it felt like it could influence brain functions. Http://farm9. Staticflickr. Com/8070/8213683889_517a10ef52_o. Pngon flac and ogg vorbis audio file formats. Contact me if you have interest in specific sounds for open source or commercial purpose.

A recording of a backroom with the extractor fans running, the audio is high in pitch/frequency and can be used in instances like machinery rooms, all of my sounds come uncompressed or processed. This means there may be unwanted background noise/ sound that you can remove or not at your will. Equipment used:. Tascam dr40 w/ built in stereo microphone. File information:48,000hz24bit wavstereo.

Basically i connected one lfo to the polivoks in. Now when i think of it. Wonder if that added something…. And how much. And to cv1 i connected a square wave and to cv2 a wide frequency sine wave. Resonance at max. Think i have to reanalyse this patch later… i’ll be back!.

Lofi radio sound recorded with 3 eur cheap radio unit. Recorded with tascam dr-22wl. ---in case you use any of my sounds, i will be happy to be informed, although it is not necessary. Recorded in 2018.

Recorded and processed at 24bit 48khz using a rode nt1-a condenser microphone. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Footsteps in wet coarse sand, close up, some steps in water. Little low frequency boom noise should be remove. France, 2009. Recorded with schoeps cmc6 mk41recorded on soundddevice 744twave mono, 16 bits, 48khz.

Recorded and processed at 24bit 48khz using a rode nt1-a condenser microphone. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Turning on radio reciver and going through fm frequency of few polish radio stations (for only few seconds). Can be used for background noice or transision for audio. Also lots of white noise plus click noice of turning on/off (begining and ending).

I don't remember making this, but i'm pretty sure all i did was run some white noise through bassboost a couple times. It works for earthquakes, distant tiger roars, and other subsonic sounds.

Field recording of a summer afternoon (28th june, ~20:30) in berlin lichtenberg. The recorder (edirol r-09rh) was set in a very high building, therefore the sound consists mainly of ambient noise, eventually with subtle concrete sounds (birds, childs, dogs, sirens,. . . ). The audio is unfiltered, so it's dominated by low-frequency energy. Filter as you wish :). (the web preview seems to have some high frequency artifacts. Download the wav file to get it on full quality).

Airport checkin acknowledge sound. Request from ratla. Used the original recording, cutted the first part. Noise-reducted 2 times. Leveled the frequencies a bit higher and finally set an echo on it to fade out slowly. Equipment used: audacity.

Still random frequency transformed with plugins. This time it's a saw waveform moduled by a sine lfo. Add a little of this and a little of that. Make me thing at a the sound of the rain on a strange planet!.

Snippets from recordings of me playing the tanpura. The strings are tuned to b, d, g and e, so would work well in the keys of g or e minor. I noticed that my first pack of tanpura samples has a bit of fuzzy white noise so in this pack i have equalized - i reduced all the very high frequencies which got rid of most of the white noise without affecting the low frequency sounds of the tanpura itself. Please note this is the tanpura part of an instrument called the swar sangam which combines the swarmandal (indian harp) and the tanpura, it is not a traditional tanpura and does sound slightly different.

Simple synth snare + 3 higher speeds. ⸻ "how do you make a classic synth snare, do you just take white noise and go like. . . " *goes like* ". . . Huh" yep you just go like. (going like consists of setting an oscillator to sine with just a release tail and noise + a lowpass snapping up and trailing off gently + compression/distortion of some sort + high frequency shelf snapping down from high gain and then back up).

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

Realised to my dismay that this sound was not available. A card tapping and scraping on a ceramic plate. Designed to imitate the noise of cocaine being cut up. Recorded on a tascam dr-40 in a 4m square kitchen. Tea towel was placed under the plate to cut out an excessive noise from the plate itself. Recorded with a low frequency cut off at 80hz.

This is a pack of 20 synthesized snare sounds with different "variables" for varieties. Wave forms slightly differ as well as the cutoff frequencies, resonance, and noise lengths are all slightly different from each other.

Chaotic resonances that soon falls into more and more chaotic behavior. Quite a smooth chaotic noise sound. Made from 2 sine oscillator frequency modulating each other and some variable controls. Programmed in chuck programming language.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

This is full sequence of music-box in tea can with screweing up(?) until full stop. It's gift-set of tin box with tea and onboard music box. First i'm winding up music box, put box on the table, then it plays until full stop. This audio recorded with sony mobile communications audio recorder (android) on nexus 4 in pcm wav. Then it was slightly edited with audacity - tiny noise reduction and equalisation (boost frequencies below ~400 hz, lowered frequencies higher than ~2500 hz).

An artistic experiment searching for sound emissions and the limit of human hearing. Composed of infrasonic material that have a low acoustic impedance. Humans will be able to identify tones as low as 12hz. Natural and human produced infrasonic sounds is anywhere, all the time. The artistic idea was to use background noises, signal fidelity, harmonic distortion, low-frequency in order to foster a soundscape of infrasound that travels through space. Made for project that was never released. Think somebody might enjoy or use it.

Noise installation @ “shakhta”the project takes the form of an amplified live stream of the sound of a motorway. The purpose is to hear unnatural sound within an existing natural environment,creating interesting and unusual details of frequencies while watching object (motorway). Tbilisi, georgia tascam dr-40xsee more details here: https://tetenoise. Wordpress. Com/2021/01/20/noise-installation-at-shakhta/.

Raw sampled ieframe. Exe on a hungarian windows 7 64-bit computer using audacity. The reason why it's only 11khz in frequency range is becaue 44 100 hz makes the sample too high pitched.

Heard some cows across my street mooing at each other. They sounded sad and/or upset. Recorded on the zoom h4n. Edited in reaper to remove dead air/movement/excessive wind and eq'd some of the high frequency noise out.

Just waves at the beach. Nightrecording with almost no other noise (no birds, people, cars; removed low frequency wind noise); 48/24-stereorecording with zoom h1, normalized, now in 48/16.

Material from a waldorf q processed in live with a waldorf dpole, the uad helios69 eq and neve compressor. Gritty low fi shifting, high frequency lfo on a bpf. Hard digital distortion effects. Highest sample rate and quality of recording for this style of effect.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.

I recorded the rain in brooklyn and wanted to make a blade runner kinda vibe for sleeping, there's a helicopter in there too, i threw in some low-frequency kinda whale/space ship noises.

Radio scanner. Sfx conversion edited: adobe + fxs + mastered. Sound and loops freesound. Org/people/szegvari/. Musichttps://soundcloud. Com/user-174290723.

Recorded and processed at 24bit 48khz using the tascam dr-40 linear pcm recorder. Processing: gain-staging and soft high and low frequency filtering. No eq boost or cuts anywhere else. Also de-noised.